Passive fire protection and fire safety
Stenca Penetration Seal has been developed and tested to meet the very latest industry standards, and has achieved high levels of performance to meet the tough requirements in hydrocarbon fire hazard environments.
The penetration seal is made from ceramic and glass cloths/blankets and high grade stainless steel in order to provide protection against harsh environments such as those experienced offshore.
Stenca Penetration Seal has an elastomeric membrane coating which under fire conditions has been proved to be totally innocuous. The seal accommodates requirement of A0/H0 A60/H60 H120 J30/J60 and J120.
Is manufactured with strict quality control procedures and practices, in accordance with requirements of ISO 9001.
Throughout testing, Stenca Penetration Seal has maintained its integrity, stability and insulation properties and accordingly carry certification issued by either Lloyds or DNV.
Accommodate movements of up to 25mm in any direction. However, Stenca Penetration Seal can be constructed to meet higher needs. Please contact us for further information.
Stenca Penetration Seal protects from a fire hazard on the same side of the bulkhead or deck as where the seal is placed. If a fire hazard exists on both sides we recommend using a double sided seal. Nevertheless, the single sided seal can be custom made with hot face material on both inner and outer side of the seal if necessary.
Stenca Penetration Seal is supplied with fitting instructions, adhesive and stainless steel clips for fast and easy installation.
Areas for fire protection and fire safety
- FPSO units
- Refineries
- Oilrigs
- Power plants
- Offshore/Ships
- Shipyards
- Marine
- Manufacturing
- Industry
Applications
- Fireproofing insulation
- Fire protecting insulation
- Personal protecting insulation
- Insulation of high temperature pipes
- Heat conservation
- Passive Fire Protection
Pipe Tee Seal
90o Elbow Seal
Flange Type Seal
Special Bend Seal
Pipe Offset Seal
Technical Data
| Pipe diameter | Stardard seal lenght A | Sleeve diameter | Standard clipping lenght B |
| Up to 100mm (4″ NB) |
150mm | Up to 300mm (12″ NB) |
25mm |
| 125mm to 250mm (5″ NB to 10″ NB) |
200mm | 350mm above (14″ and above) |
45mm |
| 300 and above (12″ NB and above) |
250mm |
Single Sided Firetex Pipe Seal
Internal & External Protection for A0 & H0 fire and blast rated decks.
Internal & External Protection for A0 & H0 fire and blast rated bulkheads
Double Sided Firetex Pipe Seal
Internal & External Protection for A60, H60 & H120 fire and blast rated decksInternal & External Protection for A60, H60 & H120 fire and blast rated bulkheads. Internal & External Protection for A60, H60 & H120 fire and blast rated decks
Special H120 Firetex Pipe Seal
Internal & External Protection for A60, H60 & H120 fire and blast rated barriers
Jet Rated Pipe Penetration Seal
H120 Fire and blasted rated decks and bulkhead with Jet fire protection up to 120 minutes
Multi-leaf Conductor Seal
A Multi-Leaf conductor seal for extensive movements
Non-standard Penetration Seals
Customer designed seals
Escape Tunnel Joint Seals
Customer designed flexible and large tunnel joint seals