Stenca Penetration Seal

Stenca Penetration Seal has been developed and tested to meet the very latest industry standards and has achieved high levels of performance to meet the though requirements in hydrocarbon fire hazard environments.

Stenca Penetration Seal is made up from ceramic and glass cloths/blankets and high grade stainless steel in order to provide protection against harsh environments such as those experienced offshore.

Stenca Penetration Seal has an elastomeric membrane coating which under fire conditions has been proved to be totally innocuous. The seal accommodates requirement of A0/H0 A60/H60 H120 J30/J60 and J120.

Stenca Penetration Seal is manufactured with strict quality control procedures and practices in accordance to requirements of ISO 9001.

Throughout testing, Stenca Penetration Seal has maintained its integrity, stability and insulation properties and accordingly carry certification issued by either Lloyds or DNV.

Stenca Penetration Seal can accommodate movements of up to 25 mm in any direction. However, Stenca Penetration Seal can be constructed to meet higher needs. Please contact Stenca Trading A/S for further information.

Stenca Penetration Seal protects from a fire hazard on the same side of the bulkhead or deck as where the seal is placed. If a firehazard exists on both sides we recomend using a double sided seal. Nevertheless, the single sided seal can be custom made with hot face material on both inner and outer side of the seal if nessesary.

Stenca Penetration Seal is supplied with fitting instructions, adhesive and stainless steel clips for fast and easy installation.

Pipe Tee Seal	90^o Elbow Seal	Flange Type Seal	Special Bend Seal	Pipe Offset Seal

Data Sheet

Download

Singlesided Stenca Penetration Seal

1: Stenca Penetration Seal installed according to fitting instructions.
2: Pipe Sleeve.
3: Ceramic Fibre Insulation 128 kg/m3 density or suitable equivalent.
A: Standard Seal Length
B: Standard Clipping Length

Doublesided Stenca Penetration Seal

Technical data:

Pipe diameter	Stardard seal lenght A	Sleeve diameter	Standard clipping lenght B
Up to 100mm (4" NB)	150mm	Up to 300mm (12" NB)	25mm
125mm to 250mm (5" NB to 10" NB)	200mm	350mm above (14" and above)	45mm
300 and above (12" NB and above)	250mm

When ordering please specify the following data:

Pipe diameter (inch) + Sleeve diameter (inch) + Single or Double sided.

Single Sided Firetex Pipe Seal

Internal and External Protection for A0 & H0 fire and blast rated decks
Internal and External Protection for A0 & H0 fire and blast rated bulkheads
Includes Lloyd's Cert. SAS F040443 & Blast Cert. LWT 401087/1

Double Sided Firetex Pipe Seal

Internal and External Protection for A60, H60 & H120 fire and blast rated decksInternal and External Protection for A60, H60 & H120 fire and blast rated bulkheads
Internal and External Protection for A60, H60 & H120 fire and blast rated decks
Includes Lloyd's Cert. SAS F040444 & Blast Cert. LWT 401087/1

Special H120 Firetex Pipe Seal

Internal and External Protection for A60, H60 & H120 fire and blast rated barriers
Includes SAS F040442, Blast Cert. LWT 401087/1 and DNV Cert. F-15798

Jet Rated Pipe Penetration Seal

H120 Fire and blasted rated decks and bulkhead with Jet fire protection up to 120 minutes
Includes Lloyd Cert. (SAS F050036, SAS F050037, SAS F000329) & Blast Cert. LWT 401087/1